Alvis3 3 Axis Robot Arm Max Working Radius 650MM Load 600G For Grbl Controller

Description

Description
Alvis3 3Axis Robot Arm Mechanical Arm Max Working Radius 650MM Load 600G For Grbl Controller
Specifications:
- Number of axes: three axes. X rotation axis, Y horizontal telescopic axis, Z up and down lifting axis
- Machine outline size (without end effector): L = 800mm; H = 390mm; W = 145mm
- Maximum working radius: 650 mm
- Minimum working radius: 130mm
- Lifting stroke: MaxTop - MinTop = 200mm
- Robot arm weight: 4.3kg
- End load: 600g (including the weight of your actuator)
- Working environment voltage: INPUT: AC100~240V 50/60Hz; OUTPUT: 12V 6A
- Weight-bearing round-trip accuracy: <=1mm
- Fastest speed acceleration: X axis: 12000 degrees/minute, acceleration: 500 degrees/second square; Y axis: 20000mm/min, acceleration: 1000mm/sec square; Z axis: 10000 mm/min, acceleration: 500mm/sec square
- Material: Main board material is PVC engineering plastics
- End effector: None
- Fixed installation: 4pcs m4 mounting holes are reserved on the base
- Limit switch: X axis none; Y axis minimum + maximum micro switch limit; Z axis maximum micro switch limit
- Control method: The upper computer sends the G code through the serial port, and the lower computer Grbl interprets and executes the G code. The upper computer can be a computer or a single-chip microcomputer.
- PC software: For Grbl Controller (free software)
- Control command: X in the G code is the rotation angle of the base, in degrees. Y is the amount of expansion and contraction of the horizontal arm, in mm. Z is the lifting distance in mm
- Controller chip: For ATMMEGA328P
- Driver chip: A4988
- Computer connection: USB cable, AM~BM (square mouth) 1.5 meters
- Power: Peak 72W
- Lower computer system: Grbl1.1
- Control command: G code
- Expandable ports: TXRX, D11, A0, A4, A5. 12V output ports, such as relays, solenoid valves, etc., can be opened or closed with the M command
Package Included:
- 1 x Set of Mechanical Arm
Note:
Because the volume of the whole machine is too large, the robot arm is divided into the main part and the horizontal axis part after assembly and measurement, and they are packed separately. When you get the machine and follow the instructions to restore it as a whole.|
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
On Jul-06-21 at 00:08:13 PDT, seller added the following information: