KERUI Z31 Detector Shock Door/Window E9X8

Description

Notes:
During detector installation, due to the high sensitivity setting, the installation location occurs false alarms frequently. Please properly low down the sensitivity ; if the false alarms still occurs in low sensitivity , maybe installation location with too much external environment interference to make the detector can not works well.
1. Do not install it on the surface of metal.
2. Do not install it at the strong of position.
3. This is non-waterproof product, do not install it outdoor.
Replace the :
When the detector is in low voltage, the users need buy and replace the by themselves, or the transmitted signal may be weakened. Please replace the in the following :
1. Press the , slide and open the cover.
2. Take out old .
3. Place the new , 2pcs AAA alkaline , pay attention to the positive, negative charges.
4. Test the new : dial code sending button, the indicator light works and send the code to the alarm host.
5. Put the cover back and fix it well.
Overview:
The KR-Z31 Detector adopt the advanced technology, with attractive appearance design, smooth shape, very coordinated with interior decoration and blend into the installation environment. The detector is connected with the alarm host by code setting in which user programs its address code to the alarm host. When the intensity of detector surrounding is over the limited amplitude, the launches alarm signal to alarm host at once to indicate that there is an illegal .
Features:
* Alarm Function: When the detector monitors the of the surrounding over the limited amplitude, the indicator light flashes 1.5 seconds instantly, and send the alarm signal to alarm host at once.
*Low-voltage Reminder Function: When the detector is in low voltage, it will send low voltage signal to the alarm host, and the indicator light will flash 1.5 seconds. The alarm host will voice prompt: "Zone XX is in low " to remind you to change the . The detector will not monitor anymore after send the low voltage signal, and the indicated light will flash 4 times for every 30 seconds until off.
*Tamper-proof Function: There is a tamper proof button in the back of detector, when the detector is removed, the tamper button would be triggered, the indicated light will flash 2s at once and send the alarm signal to the alarm host.
*Sensitivity Switch Function: There is a sensitivity dial code in the back of detector, you can switch the different sensitivity according to installation location to suit the current environment. (3 sensitivity switch: H-high sensitivity , M-middle sensitivity , L-low sensitivity ).
*Applications: It particularly applies to apartment, villa, hotel, residential, conference room and other places.
Specifications:
Operating Voltage: 3V
Type: 2* AAA (not inluded)
Standby Current: < 10uA
Working Current: <20mA
Transmission Frequency: 433MHz
Transmission Distance: 60m (open area)
Alert Output: Alert, Tamper Alert
Item Size: Approx. 75*50*18mm (L*W*H)
Package Information:
Package Size: Approx. 9.5 * 5.2 * 2.3cm / 3.7 * 2 * 1in
Package Weight: Approx. 62g / 2.2oz
Package List: S5703
1 * Door Detector
1 * Mounting Sticker
1 * Set of Mounting Screws