Miller Ever Full Dog Waterer (Automatically Fills To Drinking Level 5Qt)

Description

Miller Ever Full Dog Waterer (Automatically Fills To Drinking Level 5Qt)
5 Quart Plastic Ever Full Pet BowlItem #: PW5The outdoor water dish that stays full! Simply attach the 3/4 inch hose (included) to your garden hose, turn on the tap, and the bowl fills to the perfect drinking level. The automatic float controls the water level so there is no spilling or overflow. The bowl is automatically replenished every time your dog drinks, so the water always stays fresh. Made of chew-resistant, high-impact plastic with galvanized metal float assembly. Comes fully assembled. Holds 5 quarts (1.25 gallons).Automatic dog watering systemFloat control provides a continuous flow of fresh waterAttaches to a standard 3/4 inch garden hoseChew-resistant, high-impact plastic with galvanized metal float assemblyHolds 5 quarts (1.25 gallons)Minor assembly required.Tools recommendedCrescent wrenchPhilips screwdriverPlumbers tapePreparing for useThe metal float cover may be removed to help with the assembly process byremoving screws and lifting out.-1. Place rubber washer inside larger end ofadapter-2. Screw supplied adapter onto float assemblyand tighten**Recommendation: Add plumbers tape on male end of floatassembly before attaching to adapter**-3. Screw male end of supplied hose intoadapter and tighten**Recommendation: Add plumbers tapeon male end of hose before attaching toadapter****Only attach supplied hose to adapter.Other garden hoses mayleak inside adapter due to different fittings**4. Attach female end of hose to water supply and turn water on. Waitapproximately 15 minutes.The water level is preset at the factory; however, minor adjustments can bemade to increase or decrease the water level in the waterer if desired.To adjust the water level, remove the metal float cover, then remove floatarm assembly by pulling out the connecting pin, loosen the float mountingscrew and nut with a screwdriver, then rotate the float arm up or down toachieve desired water level.Make sure you retighten the mounting screwand nut securely.CAUTION: Rotating the arm too far up or failing to secure the floatmounting screw and nut may prevent the waterer from stopping the watersupply flow and run continuously.Operating Tips:If the water flow does not stop: 1. Make sure water supply pressure is below 50 psi 2. Make sure float arm moves up and down freely without binding 3. Make sure float is not hitting the metal float cover when closed 4. Remove float pin and float arm assembly:a. Check for water inside the float. Replace SW23 float if necessary.b. Remove any debris from valve tip or valve seal and testc. Replace SW8 seal and test. (An additional seal is provided on theside of the float arm)d. Check SW20 valve tip for chips, surface imperfections, or cracks.Replace valve if necessary Listing and template services provided by inkFrog
Miller Ever Full Dog Waterer (Automatically Fills To Drinking Level 5Qt)
5 Quart Plastic Ever Full Pet Bowl
Item #: PW5
The outdoor water dish that stays full! Simply attach the 3/4 inch hose (included) to your garden hose, turn on the tap, and the bowl fills to the perfect drinking level.
The automatic float controls the water level so there is no spilling or overflow.
The bowl is automatically replenished every time your dog drinks, so the water always stays fresh.
Made of chew-resistant, high-impact plastic with galvanized metal float assembly.
Comes fully assembled.
Holds 5 quarts (1.25 gallons).
Automatic dog watering system
Float control provides a continuous flow of fresh water
Attaches to a standard 3/4 inch garden hose
Chew-resistant, high-impact plastic with galvanized metal float assembly
Holds 5 quarts (1.25 gallons)
Minor assembly required.
Tools recommended
Crescent wrench
Philips screwdriver
Plumbers tape
Preparing for use
The metal float cover may be removed to help with the assembly process by
removing screws and lifting out.
-1. Place rubber washer inside larger end of
adapter
-2. Screw supplied adapter onto float assembly
and tighten
**Recommendation: Add plumbers tape on male end of float
assembly before attaching to adapter**
-3. Screw male end of supplied hose into
adapter and tighten
**Recommendation: Add plumbers tape
on male end of hose before attaching to
adapter**
**Only attach supplied hose to adapter.
Other garden hoses may
leak inside adapter due to different fittings**
4. Attach female end of hose to water supply and turn water on. Wait
approximately 15 minutes.
The water level is preset at the factory; however, minor adjustments can be
made to increase or decrease the water level in the waterer if desired.
To adjust the water level, remove the metal float cover, then remove float
arm assembly by pulling out the connecting pin, loosen the float mounting
screw and nut with a screwdriver, then rotate the float arm up or down to
achieve desired water level.
Make sure you retighten the mounting screw
and nut securely.
CAUTION: Rotating the arm too far up or failing to secure the float
mounting screw and nut may prevent the waterer from stopping the water
supply flow and run continuously.
Operating Tips:
If the water flow does not stop:
1. Make sure water supply pressure is below 50 psi
2. Make sure float arm moves up and down freely without binding
3. Make sure float is not hitting the metal float cover when closed
4. Remove float pin and float arm assembly:
a. Check for water inside the float. Replace SW23 float if necessary.
b. Remove any debris from valve tip or valve seal and test
c. Replace SW8 seal and test. (An additional seal is provided on the
side of the float arm)
d. Check SW20 valve tip for chips, surface imperfections, or cracks.
Replace valve if necessary
Listing and template services provided by inkFrog
×
×
×
Buy now and save!
Tell a friend
Visit store
Watch now
Postage info
Click the Postage tab above the listing description for more info
Click the Postage tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYING VIA PAYPAL
We accept PayPal on our all our items so you can shop with confidence.
Simple choose the PayPal option when proceeding through the checkout.
Additional Information
No additional information at this time
Ask seller a question
You might also like
Triple Pet EZ Dog Dental Care Toothbrush Toothpaste Fingerbrush Remove Plaque
CET Dual ended Toothbrush assorted colors for Dogs & Cats
CET Enzymatic Oral Hygiene Chews for Large Dogs 26-50 Pounds 30ct
Dr.Turtle Slow-Release Sulfa Calcium Block Conditions water Zoo Meds
Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© Piccardmeds4pets.com
Postage
Click the Postage tab above the listing description for more info
Payment
Accepted Payment Methods
PayPal
Returns
Returns are accepted
Items must be returned within 30 days of the auction ending
Seller will pay for return shipping.
eBay integration
by